22 Setting Up Your Computer
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1
Complete the operating system setup if you have not already done so.
2
Attach the USB printer cable to the USB connectors on the computer and
the printer. The USB connectors fit only one way.
3
Turn on the printer, and then turn on the computer.
4
Click
Start
→
Network
→
Add a printer
to start the Add Printer Wizard.
5
Install the printer driver if necessary. See "Reinstalling Drivers and
Utilities" on page 121 and the documentation that came with your printer.
1 USB connector on computer 2 USB connector on printer
3 USB printer cable
3
2
1
book.book Page 22 Friday, November 30, 2007 11:28 AM
To Next Page
Loading...
