Using Multimedia 67
4
Plug all three connectors from the other end of the component video cable
into the component video-input connectors on the TV. Make sure that the
red, green, and blue colors of the cable match the colors of the TV input
connectors.
5
Plug the single-connector end of the audio cable into the headphone
connector on the computer.
6
Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or audio device.
7
Turn on the TV, turn on any audio device that you connected (if
applicable), and then turn on the computer.
8
See "Enabling the Display Settings for a TV" on page 69 to ensure that the
computer recognizes and works properly with the TV.
Composite Video and Standard Audio
1 audio input connector 2 S-Video TV-out connector
3 composite video adapter
2
1
3
book.book Page 67 Friday, November 30, 2007 11:28 AM
To Next Page
Loading...
