Rev 1 - October 2023
3. Navigation Buttons – Use the up/down/left/right buttons to navigate
through the meter’s display. Use the center button to confirm a
selection.
4. Easy Grip Handle – The handle is contoured to provide a comfortable
grip for right or left-handed users. This shape also allows for
increased leverage when pushing the meter into hard materials. The
battery door is located on the rear of the handle.
5. Ambient Light Sensor – When the backlight is set to Auto, the ambient
light sensor will trigger the backlight to turn on or off (to the
brightness level set by the user) according to ambient lighting
conditions.
6. Electrode Connector – Connect any external special application
Delmhorst electrode. Most common for hay are the 1235 bale prod
and H-4 handle, required for 830-series bale prods and 831 prod for
windrows.
To Next Page
Loading...
Need help?
General
