DeLonghi DEM10 User Manual

16
Tank control system light
This dehumidifier has a special device to ensure correct operation.
A light on the control panel comes on to warn the user when:
1. the tank is full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .empty the tank
2. the tank is missing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .reposition the tank
3. the tank is incorrectly positioned . . . . . . . . . . . . . . . . . .position the tank correctly
4. with continuous drain: the hose is obstructed
or placed too high above the drain spout . . . . . . . . . .remove the obstruction
When the cause has been removed, the light goes off and the appliance resumes operation.
ON Dehumidifying light
This comes on when the appliance is dehumidifying. The light stays on only while the applian-
ce is actually dehumidifying. If the humidity in the room is sufficiently low, the light remains off.
Dehumidifying standby/low-temperature operation light
The light comes on to indicate low temperature operation.
When the room temperature is too low, the electronic low temperature operation device is
activated. This device allows the appliance to operate by alternating dehumidification cycles
and fan only cycles. This is to avoid the formation of ice. For frequent use in cold environ-
ments, it is recommended to heat the room at the same time.
This allows the dehumidifier to operate in conditions that ensure better performance and faster
dehumidification.
Indicator lights

DeLonghi DEM10 Specifications

General

Water Extraction Capacity	10 liters per day
Water Tank Capacity	2 liters
Power Consumption	190 W
Dimensions	495 x 340 x 255 mm
Operating Temperature Range	5 - 35 °C