EasyManuals Logo

DeLonghi DEM10 User Manual

DeLonghi DEM10
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
18
Troubleshooting
Problem Cause Solution
The appliance does not
work in dehumidifying mode
(indicator light off)
The appliance is operating
in dehumidifying mode
(light on), but the humidity
does not decrease
the appliance is not plug-
ged in
no electricity
the humidistat is on mini-
mum
the tank is full of water
•the tank is incorrectly posi-
tioned
the filter is blocked
the temperature or humi-
dity in the room is too low
the room is too large
•too many sources of humi-
dity in the room (pots of
boiling water, etc.)
•plug into the mains
check the power supply
•turn the humidistat to the
max position
empty the tank
•position the tank correctly
clean the filter
•in certain conditions, it is
normal for the appliance
not to dehumidify (in these
cases the room being
dehumidified should also
be heated)
Check the following points before calling your local authorised Service Centre.
The appliance does not
work for around 3 minutes
when restarted
•The safety device has trip-
ped
wait for 3 minutes to pass

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeLonghi DEM10 and is the answer not in the manual?

DeLonghi DEM10 Specifications

General IconGeneral
Water Extraction Capacity10 liters per day
Water Tank Capacity2 liters
Power Consumption190 W
Dimensions495 x 340 x 255 mm
Operating Temperature Range5 - 35 °C

Related product manuals