5
Connecting the mains cable
– Remove the two screws securing the cover plate A behind the cooker.
– Remove the screw C from the cable clamp.
– Insert the mains cable (type HO5 RR-F) of minimum 10 mm
2
section into the cable protec-
tor P.
– Connect the live, neutral and earth cables to the mains terminal connection block B.
EARTH
N NEUTRAL
L LIVE
– Refit the cable clamp C so that it clamps the outer sleeving of the cable.
– Refit the cover plate A.
IMPORTANT: This appliance must be earthed.
To Next Page
Loading...
Need help?
General