3 sec.
PROGRAMMING COFFEE QUANTITY/
設定咖啡份量
INFORMATION: follow the step 1-2 of section «coee preparation».
信息:請 按 照「 調 製 咖 啡 」第 1-2個步驟。
NOTE: please refer to Factory settings section for min/max programmable quantities.
注意:請參照原廠設定最少/最多份量的內容。
1. Touch and hold Ristretto, Espresso or Lungo button for at least
3 sec to enter the programming mode. Brewing starts. Button
blinks fast: programming mode.
1. 長按Ristretto,濃縮咖啡或長杯咖啡按鈕3秒以
進入預設模式。開始沖調。按鈕燈快速閃動:
預設模式。
2. Release button when desired volume is reached.
2. 直至達至所想份量才放開按鈕。
3. Water volume is now stored for the next coee preparations.
Button blinks 3 times to conrm the new water volume.
3. 水的份量設定現已被儲存作下次調製之用。
按鈕閃燈3次以確定新的預設份量。
18
7484_UM_LATTISSIMA_RESTYLE_Z3B.indb 18 23.09.14 10:34