4. Press simultaneously (hot milk) and (flat white) buttons for 3 seconds to enter Menu mode: descaling and clean alert start blinking.
NOTE: the Menu mode exits automatically after 30 seconds if no actions are performed. It can be exit manually by pressing simultaneously (hot milk) and (flat
white) buttons for 3 seconds.
5. Press (cappuccino) button.
6. The number of red squares indicates which button you should press (see table below). Now, within 30 seconds, you can set the desired value by pressing the corresponding
button. They blink 3 times rapidly to confirm new value. The menu exits automatically and machine returns to ready mode.
Emptying the system before a period of non-use, for frost protection or before a repair
1. Switch the machine ON.
NOTE: remove milk jug.
To Next Page
Loading...
