If you see that after the cleaning process the Rapid Cappuccino System is still dirty, we recommend purchasing a new one addressing to a Service Centre.
Programming quantity
NOTE: Please refer to the factory settings section for min/max programmable quantities.
1. Touch and hold the button relative to the drink you want to program for at least 3 s. to enter the programming mode. Brewing starts and the button blinks fast.
2. Release button when desired volume is reached. If the recipe includes other ingredients, press again the button and keeps pressed until the desidered volume is reached, then
release. When the last ingredient is delivered (see charts on page 25), button blinks 3 times to confirm the new drink volume. Drink volume is now stored for the next
preparations.
Restoring quantity to factory settings
1. Switch the machine ON.
NOTE: remove milk jug.
To Next Page
Loading...
