•When the appliance is connected to the domestic power supply for the first time, or after a power
out,four dashes will appear on the display (--:--).
In order to set the time of day, proceed as described below:
8
Chapter 2-Using the control and setting the modes
2.1 - SETTING THE CLOCK
1 Press the CLOCK button (6).
(the hours and the minutes
flash on display)
2 Set the desired time by push-
ing the “min +” or
“min -” buttons (7-13). The
times set will begin blinking
on the display.
3 Press the CLOCK button (6)
at any time during cooking to
display the current time.
(the display shows the time
set)
• If you wish to change the hour on the dial once it has been set, press the CLOCK button (6) before pro-
ceding to set the new time as described above.
• It is possible to display the current time even after starting a function, by pressing the CLOCK button (6)
(the time is displayed for 2 seconds).
To Next Page
Loading...
Need help?
General