Delta Electronics ASDA-A2 Series - Page 392

Chapter 8 Servo Parameters
Revision January 2011 8-147
P5 - 60 POV0 Moving Speed Setting of Position 0 Address: 0578H, 0579H
Default: 20.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 61 POV1 Moving Speed Setting of Position 1 Address: 057AH, 057BH
Default: 50.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 62 POV2 Moving Speed Setting of Position 2 Address: 057CH, 057DH
Default: 100.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
P5 - 63 POV3 Moving Speed Setting of Position 3 Address: 057EH, 057FH
Default: 200.0 Related Section:
Applicable Control Mode: PR Section 7.10
Unit: 0.1 r/min
Range: 0.1 ~ 6000.0
Data Size: 16-bit
Display Format: Decimal
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com
Call 1(800)985-6929 for Sales
deltaacdrives.com
sales@deltaacdrives.com