Delta Elektronika SM66-AR-110 User Manual

1 / 30 DELTA ELEKTRONIKA B.V. rev. Jan. 2022
DELTA ELEKTRONIKA B.V. Vissersdijk 4, 4301 ND www.DeltaPowerSupplies.com
DC POWER SUPPLIES Zierikzee, the Netherlands Tel. +31 111 413656
SM3300 - series
 SM18-220
 SM66-AR-110
 SM100-AR-75
 SM330-AR-22
 SM660-AR-11
PRODUCT MANUAL
Firmware version P0157
Contents:
1 – Safety Instructions
2 – Sicherheitshinweise
3 – Quick Start
4 – General
5 – Installation
6 – Front Menu Operation
7 – Remote Programming
8 – Trouble Shooting
9 – Maintenance & Calibration
10 – EU Declaration of Conformity
11 – UK Declaration of Conformity
Firmware Update
It is strongly recommended, first to perform a firmware update before further
operation. Download the SM3300 Quick Start Manual for instructions.
Driver & Example Software
For several applications and Interfaces there is Driver & Example Software
available on our website. See PRODUCTS\SM3300\DOWNLOADS.

Delta Elektronika SM66-AR-110 Specifications

General

Output Current	0-110A
Efficiency	> 90%
Cooling	Forced Air
Input Frequency	47-63Hz
Protections	Overcurrent, Overtemperature
Operating Temperature	0 to 50 °C
Storage Temperature	-20 to 70 °C
Output Voltage	0-66 V

Summary

Safety Instructions

Electrical Safety and Grounding

Covers general electrical warnings, shock hazards, and proper grounding procedures for mains and DC terminals.

Quick Start Guide

Connecting the Unit

Step-by-step instructions for connecting AC and DC power terminals, LAN, and other interfaces.

Unit Operation and Firmware Update

Basic steps to operate the unit, including switching on, checking firmware version, and performing updates.

General Product Information

DC Output, Auto-Range, and Protection

Installation and Setup

Environmental, Mounting, and Connection Safety

Covers humidity, temperature, rack mounting, safe connection procedures, and insulation requirements.

Terminal and Interface Connections

Front Menu Operation

Menu Access and Navigation

Menu Settings and Configuration

Remote Programming

Source Settings and Web Interface

Explains how to set programming sources and use the web interface for control and monitoring.

Menu Configuration and Administration

Troubleshooting

General Troubleshooting Approach

Provides guidance on contacting support, RMA forms, and general fault reporting.

Common Output and Programming Issues

Addresses problems like no DC output, programming failures, and master/slave parallel issues.