TABLE OF CONTENTS
FUNCTIONAL DESCRIPTION
The DELTA
®
36-T30
T3
and the DELTA
®
36-T50
T3
Fence Systems include the Fence Assembly, Front Rail, Rear Rail and Front Guide
Tube along with the Mounting Hardware for assembling the Fence System to most DELTA
®
Table Saws and to some non-DELTA
®
Table Saws.
In addition, the DELTA
®
36-T50
T3
Fence System also includes an Accessory Leg Kit, to be used with a Wooden Extension Table. The
Wooden Extension Table is purchased separately or can be constructed by following the instructions in this manual.
NOTICE: The illustrations contained in this manual show the 36-T30
T3
fence system as it installs on the DELTA
®
36-729 table saw.
These figures are intended to illustrate technique only. The specific configurations and hardware needed to attach this fence to your
particular saw may vary.
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not be exact depictions of the actual labeling or accessories included. They are intended for illustrative
purposes only.
FUNCTIONAL DESCRIPTION ...........................................2
IMPORTANT SAFETY INSTRUCTIONS .........................3
SAFETY GUIDELINES - DEFINITIONS ..........................3
GENERAL SAFETY RULES ................................................4
CARTON CONTENTS ........................................................5
ASSEMBLY .................................................................6
OPERATION AND ADJUSTMENT.................................9
TROUBLESHOOTING ...................................................12
MAINTENANCE ............................................................. 12
TROUBLESHOOTING .................................................... 1 2
ACCESSORIES ............................................................... 13
WARRANTY ................................................................... 13
PARTS, SERVICES AND WARRANTY ASSISTANCE ....... 1 3
REPLACEMENT PARTS .................................................. 1 3
FRENCH ......................................................................... 14
SPANISH ....................................................................... 2 6
PROPOSITION 65 WARNING:
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
If tool is loaned to someone, also loan them these instructions.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement and other masonry products
• Arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals: work in a well-ventilated area and work with approved safety equipment, such as dust masks that are specifically
designed to filter out microscopic particles.
2 3
To Next Page
Loading...
