14
within 2 hours. Then the unit will run at this set temperature.
There is no SLEEP mode under the FAN mode.
Note: The SLEEP button is not available for the wired remote controller. If required, this
function should be performed through the wireless remote controller.
Fig. 11
ƹ
Swing Control(Fig. 12)
Press the Swing button and then the swing mode will be operated by the air conditioner.
Repress the Swing button once to stop the swing mode.
SWING
ROOM TEMP
SWING
Fig. 12
Note: There is no swing mode for the duct type indoor unit
ƹ
Fan Speed Control(Fig. 13)
Every press of the fan speed button will change the fan speed according to the following
order:
Under the DRY mode: The fan will be set to the low speed automatically.
To Next Page
Loading...
