1
AG9032 v1 Spine and Leaf Switch
Chapter 1: Introduction
1.1 Overview
The AG9032 v1 is a high performance, high density next generation switch with target
application for Data Center Networks. It has Thirty-Two 100GbE QSFP28 ports which
support 100GE Applications. In addition to the rich bandwidth, the AG9032 v1 provides
comprehensive capability on layer 2 and layer 3 features support, including SNMP, Spanning
Tree, VLAN, QinQ, Trunk, QoS, RIP, OSPF, IGMP, DVMRP, PIM-DM, PIM-SM, Access
Control, etc. This product which aims for Data Center Networks also supports advance
features such as MPLS, TRILL, PFC, VEPA, QCN, VxLAN and NVGRE to meet the high-
demanding Data Center high performance and virtualization requirement. This product is
good for Data Center Aggregation switch application.
1.2 Package Content
After unpacking this switch, check the contents to be sure you have received all the
components. Then, before beginning the installation, be sure you have all other necessary
installation equipment.
• The AG9032 v1 switch
• 1 x AC power supply for AC version or 1 x DC power supply for DC version
• Rack-mounting kits
• 2 x Velcro strips
• Installation guide
If any item is missing or damaged, contact the vendor immediately, see “Technical Support”.
To Next Page
Loading...