AS Series Module Manual
9- 64
28) Use the monitor function in ISPSoft to verify that the transmission is working correctly.
29) In SCMSoft, right-click the item COM PORT History on the left and click the option “Upload COM History Data” to
see the transmission history of COM1 and COM2 respectively. Under the item COM1 and COM2, you can view
recent transmission history; however the shown recent history cannot be deleted or saved.
30) Select To o ls -> Return to Default to clear the previous settings and have all the settings back to defaults. After
this, turn the power off and on again.
To Next Page
Loading...