Chapter 11 DeviceNet Master Scanner Module AS01DNET-A
11-9
1
Product picture Model Function
IFD9502
Used for connection of the DeviceNet network and
electromechanical equipment such as
drive, PLC, temperature controller, servo drive, HMI,
user-defined device.
IFD6503
A fieldbus data analysis tool, with one end: CAN
interface and the other end: USB interface can be
used for getting the CAN data or sending the data to
the CAN node. It is used with the Netview Builder
software together.
E-series AC motor drive
Used for connecting AC motor drive to DeviceNet
network via CME-DN01 card.
CMC-DN01
Used for connecting C2000 series AC motor drive to
the DeviceNet network.
DN-02
Used for the connection of DeviceNet network and
AC motor drive.
DVPDT01-S
Used for the connection of DeviceNet network and
S series PLC.
To Next Page
Loading...
Need help?
General
