AS Series Module Manual
11-10
Product picture Model Function
DVPDT02-H2
Used for the connection of DeviceNet network and
DVP-EH2 series PLC.
TAP-CP01
The distribution box for CAN topology, with the 120
ohm resistor enclosed which is controlled to take
effect or not via its switch.
TAP-CN01
The distribution box for CAN topology, with the 120
ohm resistor enclosed which is controlled to take
effect or not via its switch.
TAP-CN02
The distribution box for CAN topology, with the 120
ohm resistor enclosed which is controlled to take
effect or not via its switch.
UC-DN01Z-01A UC-DN01Z-01A: DeviceNet trunk cable.
UC-DN01Z-02A UC-DN01Z-02A: DeviceNet branch cable.
To Next Page
Loading...