Delta AS16AN01T-A User Manual

Chapter 9 Ethernet Specification and Operation
9-37
9_

Use TAG function in data mapping
a) Create a General Device in the Network View as shown below and then set the IP address to be used
as a Produced TAG. For adding a device, please refer to Section 9.4.3.
b) Start or switch to the data mapping page.
c) Once you select the TAG check box, the directional arrow is to the left with () (READ only)

Delta AS16AN01T-A Specifications

General

Brand	Delta
Model	AS16AN01T-A
Category	Control Unit
Language	English