To Next PageTo Next Page
Need help?Do you have a question about the Delta AS16AP11T-A and is the answer not in the manual?
General| Series | AS Series |
|---|---|
| Points | 16 |
| Digital Input | 8 |
| Digital Output | 8 |
| Power Supply | 24V DC |
| Input Voltage | 24V DC |
| Output Voltage | 24V DC |
| Protection Class | IP20 |
| Type | Programmable Logic Controller |
| Output Current | 0.5 A |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Humidity | 5% to 95% (non-condensing) |
| Dimensions | 90 mm x 60 mm |
| Weight | 200 g |
Details functional and electrical specifications for various AS300 and AS200 CPU modules.
Provides system requirements and steps for installing ISPSoft software.
Details system requirements and steps for installing and uninstalling the COMMGR communication manager.
Guides on how to install modules and secure them on the DIN rail.
Provides instructions for wiring power supply modules and I/O modules.
Guides on configuring hardware modules and setting parameters within HWCONFIG.
Covers creating a program, including adding ladder diagrams and basic editing.
Explains how to create a connection, download programs, and perform connection tests.
Introduces the CARD Utility for backing up and restoring module data and ISPSoft projects.
Guides on backing up projects to an AS Series CPU module or memory card.
Explains how to restore projects from a backup file to an AS Series CPU module or ISPSoft project.
Details the process of restoring data automatically when power is supplied after backup.
Explains how the system stores CPU error messages and how to read them.
Details the installation of EtherNet/IP devices, including network cable setup.
Guides on running EIP Builder, setting IP addresses, and network configuration.
Lists error code classifications and troubleshooting steps for configuration and application errors.
Guides on editing request/response message mapping for SDO, NMT, and Emergency messages.
Provides troubleshooting steps for CANopen network node state display.
Explains the two operating modes: STOP mode and RUN mode, and their functions.
Covers basic troubleshooting steps, clearing error states, and identifying possible causes.
Details troubleshooting steps for CPU modules based on LED indicators and error codes.
Provides troubleshooting steps for various I/O modules like Analog, Temperature, Positioning, etc.
Lists error codes and LED indicators for CPU modules and their corresponding solutions.
