AS Series Operation Manual
ASD-A2-xxxx-M
servo driver
This servo driver has a built-in CANopen
interface. It controls positioning, speed, and
torque.
VFD-
C2000/CP2000/C200
series AC motor drives
This AC motor drive has a built-in CANopen
function, and controls positioning, speed,
and torque. For the C2000/CP2000 series AC
motor drives, you must purchase a CMC-
COP01 to provide the CAN interface. Only
the C200 series AC motor drive has the built-
in CANopen interface.
VFD-EC series AC motor
drive
The EC series AC motor drive has a built-in
CANopen interface. It controls speed and
torque.
TAP-CN01
This CANopen network topology distribution
box has a 120 ohm resistor enabled with a
switch.
TAP-CN02
This CANopen network topology distribution
box has a 120 ohm resistor enabled with a
switch.
TAP-CN03
This CANopen network topology distribution
box has a 120 ohm resistor enabled with
switch.
To Next Page
Loading...
Need help?
General
