User and Installation Manual, DE212 GLOBAL
DELTA RC AS Page 21 of 36
Document 02743
TECHNICAL DATA
This equipment complies with the following standards:
Europe/EU: ERC 70-03 EN 300-400. USA: FCC 15.249. Japan: STD-T66.
It is in accordance to EU’s demands in order to label the equipment with CE.
Transmitters are ATEX/IECEx approved, according to: EN 50 014:1997+A1+A2. EN 50 020:2013 and
For the EU : II 2 G Ex ib IIC T4, EN 60079-0:2012 + A11:2013 and EN 60079-11:2012
IECEx: IEC 60079-0 Ed.6 and IEC 60079-11 :2011
ATEX certification number: ZELM 03 ATEX 0139x
IECEs certification: IECEx ZLM 13.005X
General Specification
• Frequency: 2,4 GHz
• Modulation: GFSK
• Coding: Digital coding, 65.536 different pre-set codes from manufacturer.
• Functions: Three functions, Deadman, STOP and one extra.
• Temperature Range:
o Operation: -20 to +50º C. For lower temperature, contact manufacturer.
o Storage: -40 to +65º C.
o Charging: 0 to +50º C.
• Shock Resistance: 1 m free-fall on concrete floor.
Receiver
• Antenna: External standard aerial, 14,5 cm long.
With FME connector on receiver top.
• Power Supply: 11 to 27 V DC. Voltage above 35VDC shuts down the receiver.
• Power Consumption: Standby: 55mA.
During full charging: 110mA.
• Outputs: Semiconductor. 2A, each. 12/24 V DC output when active.
o Deadman output.
o Interlock, output when transmitter is in the charging station.
o Timer warning signal.
o Beeper warning output.
o Normally closed output, opens when STOP is activated.
• Inputs:
o External STOP
o External Override
• Transmitter charging: Front panel charging station for transmitter, max current 50mA.
• Connections: Screw terminal on PCB connector.
• Controls: 1 push-button CODE, for coding to the transmitter.
• Indicators: Green light diode that indicates power on.
Yellow light diode that indicates recharging and in operation.
• Housing: ABS polycarbonate, class IP52.
• Dimensions: L:160 mm, W: 80 mm, D: 60 mm.
• Weight: 0.3 kg
To Next Page
Loading...
