To Next PageTo Next Page
Need help?Do you have a question about the Delta DOP-100 Series and is the answer not in the manual?
Lists compatible, partially compatible, and incompatible models for transitioning between DOP-B and DOP-100 series HMIs.
Explains how DOPSoft 4.0 automatically converts DOP-B project files to DOP-100 series models for seamless transition.
Details the differences in button fill styles (Fixed vs. Gradient) between DOP-B and DOP-100 series HMIs.
Explains how DOP-100 integrates 'Goto Screen' and 'Previous Page' into one function, unlike DOP-B's separate buttons.
Outlines the changes in user account and password management for security levels between DOP-B and DOP-100.
Discusses audio output availability in specific models and how it's handled during conversion, noting potential removal of the function.
Lists DOP-100 models supporting multi-language input and how this feature differs from DOP-B.
Explains the default printer change to 'ePrinter' and the 'Report List' button becoming 'Print Output' upon conversion.
Details how file encryption is performed on DOP-B (HMI/PC) versus DOP-100 (PC only).
Describes COM port interface changes (e.g., COM1 to COM2) for specific models during transition.
Provides instructions and a link to resolve OpenGL driver errors after compiling DOP-100 screens.
Lists compatible, partially compatible, and incompatible models for transitioning between DOP-B and DOP-100 series HMIs.
Explains how DOPSoft 4.0 automatically converts DOP-B project files to DOP-100 series models for seamless transition.
Details the differences in button fill styles (Fixed vs. Gradient) between DOP-B and DOP-100 series HMIs.
Explains how DOP-100 integrates 'Goto Screen' and 'Previous Page' into one function, unlike DOP-B's separate buttons.
Outlines the changes in user account and password management for security levels between DOP-B and DOP-100.
Discusses audio output availability in specific models and how it's handled during conversion, noting potential removal of the function.
Lists DOP-100 models supporting multi-language input and how this feature differs from DOP-B.
Explains the default printer change to 'ePrinter' and the 'Report List' button becoming 'Print Output' upon conversion.
Details how file encryption is performed on DOP-B (HMI/PC) versus DOP-100 (PC only).
Describes COM port interface changes (e.g., COM1 to COM2) for specific models during transition.
Provides instructions and a link to resolve OpenGL driver errors after compiling DOP-100 screens.
General| Display | TFT LCD |
|---|---|
| Power Supply | 24VDC |
| Resolution | 800 x 480 |
| Touch Panel | Resistive |
| Communication Ports | RS-232, RS-485, USB |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Memory | 128MB Flash |
| Humidity | 10% to 90% RH (non-condensing) |
| Display Size | 7 inches |
