Need help?Do you have a question about the Delta DTB9696 and is the answer not in the manual?
General| Control Mode | PID, On-Off |
|---|---|
| Input Type | Thermocouple, RTD |
| Output | Relay |
| Display | Dual LED |
| Power Supply | 100-240VAC |
| Dimensions | 96 x 96 mm |
| Control Algorithm | PID |
| Communication | RS-485 |
Safety warnings to prevent electric shock hazards during controller operation and maintenance.
Essential precautions for safe operation, installation, and handling of the controller.
Detailed explanation of the controller's display, LEDs, and pushbutton operations for user interaction.
Guide to specifying and ordering different DTB series models based on panel size and output groups.
Comprehensive technical specifications including input voltage, power, display method, and environmental limits.
Information on supported temperature sensors and their respective measurement ranges.
Description of the controller's operation modes and how to set parameters.
Details on switching between operation, regulation, and initial setting modes.
Explanation of simultaneous heating and cooling operation using dual loop output control.
How to select and configure PID control modes and parameters for optimal performance.
Settings and operational parameters for controlling external valves for output regulation.
Detailed description of alarm types, activation conditions, and output operations.
Setting up and executing PID program control with patterns, steps, and timing.
How to utilize optional event inputs for controlling operations like RUN/STOP or temperature settings.
Managing the execution, display, and step editing for PID program control.
Specifics on valve feedback, dead band, and auto-tuning settings for valve control.
Configuration details for RS-485 communication, including speed, protocol, and data registers.
Mapping of communication addresses to register content for various parameters and status.
List of bit register addresses for controlling and monitoring communication status and settings.
Diagrams illustrating panel cutout dimensions and terminal connections for DTB series models.
Visual representations of the external dimensions for different DTB models, provided in millimeters and inches.
Instructions for physically mounting the controller and connecting CT wiring if applicable.
Guide to understanding communication error codes and display messages for troubleshooting issues.
Contact details for Delta Electronics support offices in different geographical regions.
To Next Page
