To Next PageTo Next Page
Need help?Do you have a question about the Delta GR275 and is the answer not in the manual?
Explains symbols used for safety information and hazard recognition.
Warns about chemical exposure from dust and advises on protective measures.
Emphasizes reading the manual, wearing proper apparel, eye/hearing protection.
Covers keeping the area clean, machine maintained, and checking for damage.
Includes avoiding unintentional starts, using guards, and proper workpiece handling.
Warns about damp environments, dust hazards, and the need for alertness.
Covers using correct wheels, proper mounting, and inspecting for damage.
Advises on proper adjustment of eye shields, spark guards, and tool rests.
Details techniques like dressing wheels, feeding work, and avoiding coolant contact.
Includes cleaning, avoiding flammable areas, and securing the machine.
Specifies a dedicated circuit with correct wire gauge and fuse for the machine.
Warns against operating the machine in wet or damp conditions due to shock hazard.
States the machine's electrical specifications: 120V, 60Hz AC.
Emphasizes grounding for operator protection against electric shock.
Details grounding, adapter use, and receptacle verification for safety.
Provides guidelines for choosing appropriate extension cords based on gauge and length.
Introduces the grinder and clarifies that manual illustrations may differ from the actual model.
Lists all parts and accessories included in the grinder's packaging.
Instructs on unpacking, removing oil, and applying wax for protection.
Warns against using highly volatile solvents for cleaning the machine.
Lists required tools and estimated time for assembling the grinder.
Provides steps for assembling, attaching, and adjusting the tool rests.
Details mounting the spark guards and their proper adjustment for safety.
A clear caution to always wear eye protection when using the grinder.
Step-by-step instructions for attaching the eye shields to the spark guards.
Advises securing the grinder to a stable surface to prevent movement or tipping.
Introduces the grinder's controls and how to adjust them.
Instructions on turning the grinder ON and OFF safely.
Explains how to lock the switch in the OFF position for safety.
Details the operation and speed range of the variable speed control knob.
Instructions for operating the independent flexible lamp, including bulb type.
Covers RPM ratings, dimensions, and safe use of grinding wheels.
Provides instructions on how to use a dresser to condition the grinding wheel.
Critical warning to disconnect power before performing any wheel changes.
Details the process of removing wheel covers, nuts, flanges, and old wheels.
Emphasizes correct arbor nut tightening and wing contact to prevent vibration.
Covers reinstalling covers and adjusting guards/rests after wheel replacement.
Critical warning to disconnect power before installing a buffing wheel.
Details removing the grinding wheel, flange, and preparing for buffing wheel installation.
Step-by-step guide for mounting the buffing wheel, spacer, flanges, and nut.
Reiterates that proper arbor nut wing contact is crucial to prevent vibration.
Explains how to store the supplied wrenches in the holder on the grinder's rear.
Provides contact information and website for troubleshooting help.
Advises periodic cleaning of air passages and plastic parts.
Lists checks for when the machine fails to start, like outlet and power supply.
Guidance on weekly waxing and rust removal for cast iron surfaces.
Informs about accessory availability and warns against using non-Delta accessories.
Advises using identical replacement parts and where to obtain them.
Provides information on obtaining service and repairs from authorized centers.
Provides contact information for ordering replacement warning labels if they are missing or illegible.
Details the terms and conditions of the new product warranty.
Notes that the warranty does not apply to products sold in Latin America.
General
