32 RetroSign GR1 & GR3 · Retroreflectometer
APPENDIX G – RSC for RetroSign GR1 & GR3
The RSC program short for ”RoadSensorControl” is used to download data records and to control the instrument from a
more user friendly interface.
The RSC program runs on a Windows PC that has to have a USB port. The instrument connects to the PC using a USB
A/B cable.
The program installs a special USB device driver that is necessary for the PC to communicate with the instrument.
Note! Install the driver before connecting the instrument for the first time
See documentation included on the CD for details on the RSC software
RSC main user interface, data has been read from the instrument.
To Next Page
Loading...
