Need help?Do you have a question about the Delta sidekick builder's saw 36-275 and is the answer not in the manual?
Steps for unpacking the band saw and cleaning protective coatings from surfaces.
Essential general and band saw specific safety guidelines for preventing injury during operation.
List of necessary tools and instructions for assembling the band saw stand.
Mounting the band saw, motor, and switch to the assembled stand.
Guide for assembling belt guards, pulleys, and drive belt for the band saw.
Instructions for safely connecting the band saw to a power source, including grounding.
Procedure for installing the table insert into the band saw table.
How to tilt the band saw table for angled cuts, up to 45 degrees right and 10 degrees left.
Procedure for setting the table stop to ensure a perfect 90-degree angle to the blade.
Instructions for setting the correct blade tension using the upper wheel slide bracket graduations.
Steps to ensure the band saw blade runs true in the center of the wheel tires.
Adjusting upper and lower blade guides and support bearings for proper blade alignment and function.
Step-by-step procedure for safely removing and installing band saw blades.
Information on selecting, using, and caring for band saw blades for optimal performance.
Key principles and checks for operating the band saw safely and effectively.
Techniques and considerations for cutting curves with the band saw effectively.
Information on obtaining parts, service, and technical assistance for the band saw.
Details of the manufacturer's limited warranty for building trades and home shop machinery.
To Next Page
General