To Next PageTo Next Page
Need help?Do you have a question about the Delta ShopMaster S26-263L and is the answer not in the manual?
Ensures a clean, well-lit work environment and safe operation of power tools.
Guidelines for safe electrical connections and usage to prevent shock hazards.
Emphasizes user alertness, protective equipment, and preventing accidental starts.
Covers proper tool handling, maintenance, and storage for safe operation.
Details correct power supply, voltage, and frequency requirements for the tool.
Explains the polarized plug design for reducing electric shock risk.
Guidance on selecting and using appropriate extension cords for safe operation.
Steps to secure the saw for safe transport, including releasing the arm lock.
Details on using the integrated handles for safe and easy saw transportation.
Instructions for securely mounting the saw to a workbench for stable operation.
Instructions for installing and using table extensions for workpiece support.
Guidance on installing and using the horizontal work clamp for securing workpieces.
Steps to attach the dust collection bag for managing sawdust.
Procedure for installing batteries to power the laser guide feature.
Detailed steps for safely installing or replacing the saw blade.
Instructions for ensuring the saw blade is properly aligned with the table.
Guide on operating and aligning the laser for accurate cutting.
Procedure for obtaining replacement warning labels if needed.
How to use a padlock to prevent unauthorized operation of the power switch.
Explanation of the power safety toggle for turning the saw motor on.
Step-by-step instructions for performing slide cuts with the mitre saw.
Definition and explanation of how to perform bevel cuts.
Explanation of compound mitre cuts involving both mitre and bevel angles.
Specific advice and angles for accurately cutting crown molding.
Checks and potential repairs for the saw arm's pivot action.
Procedure to adjust the positive stop screw for blade alignment.
Checking the tilt action of the saw arm with the bevel lock loosened.
Instructions for adjusting the laser alignment for more accurate cuts.
How to adjust the laser line to be parallel with the saw blade.
Adjusting the vertical angle of the laser line for accurate cuts.
Adjusting the laser line's offset to match the actual cut line.
Setting the depth stop for through cuts and non-through cuts.
Instructions for cleaning the saw, including air passages and plastic parts.
Advice on avoiding solvents and handling abrasive materials.
Step-by-step guide for replacing worn motor brushes.
Troubleshooting steps for when the machine fails to start.
Details of the product's limited warranty coverage and terms.
Information on user-replaceable parts and how to obtain others.
Procedure for obtaining replacement warning labels if needed.
Guidance on obtaining service, repairs, and contacting support.
General