Delta ShopMaster BS220LS - User Manual

INSTRUCTION MANUAL
12" Band Saw
(Model BS220LS)
PART NO. 909507 - 12-23-02
Copyright © 2002 Delta Machinery
To learn more about DELTA MACHINERY
visit our website at: www.deltamachinery.com.
For Parts, Service, Warranty or other Assistance,
please call
1-800-223-7278 (In Canada call 1-800-463-3582).
ESPAÑOL: PÁGINA 21

Delta ShopMaster BS220LS Specifications

General

Type	Band Saw
Weight	42 lbs
Table Tilt	45 degrees
Motor	120V, 60Hz
Bevel Capacity	45 degrees
Blade Width Capacity	1/8 in. to 3/8 in.

Summary

Safety Guidelines and Definitions

General Safety Rules

Outlines essential safety practices for operating machinery and preventing equipment problems.

Additional Safety Rules for Band Saws

Provides specific safety precautions tailored for the operation of band saws.

Setup and Power Requirements

Power Connections and Specifications

Grounding Instructions

Assembly Instructions

Stand Assembly

Provides step-by-step instructions for assembling the machine's support stand.

Mounting Saw to Stand

Details how to securely attach the band saw unit onto the assembled stand.

Table Installation

Instructions for installing and securing the work table to the band saw.

Upper Blade Guide Assembly

Controls and Adjustments

Operating Controls

Blade Tension Adjustment

How to properly set the tension of the saw blade for optimal performance.

Blade Tracking Adjustment

Steps to ensure the saw blade runs centered and steady on the wheels.

Blade Guide and Support Bearing Adjustment

Procedure for adjusting blade guides and support bearings to prevent blade twisting.

Table Adjustments

Maintenance

Adjusting Belt Tension

Changing Blades

Operation and Techniques

Operating the Band Saw

Cutting Curves

Troubleshooting

Troubleshooting Guide

Lists common band saw problems with their probable causes and recommended remedies.