To Next PageTo Next Page
Need help?Do you have a question about the Delta ShopMaster TS300 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Motor | 15 Amp |
| No-Load Speed | 5000 RPM |
| Arbor Size | 5/8 inches |
Defines DANGER, WARNING, CAUTION symbols and their implications.
Covers 16 essential rules for safe operation, including guards, PPE, and work area.
Details 22 critical safety rules specific to table saw operations.
Discusses electrical circuit requirements and extension cord usage.
Details the machine's voltage and frequency requirements.
Explains the importance and procedure for grounding the machine.
Provides guidance on selecting appropriate extension cords based on gauge and length.
Introduces the machine's capabilities and components.
Instructions on how to unpack the machine and clean unpainted surfaces.
Lists and identifies all major parts of the table saw.
Details hardware used for blade guard, guide rails, extension wings, and stand assembly.
Lists and identifies all parts required for assembling the saw stand.
Step-by-step guide to assemble the machine's stand using provided hardware.
Instructions for securely attaching the table saw unit to the assembled stand.
Details on assembling the handwheels for blade height and tilt adjustment.
Instructions for attaching the table extension wings for increased surface area.
Step-by-step process for safely removing and installing the saw blade.
Guidance on adjusting the table insert for flush alignment with the saw table.
Instructions for assembling the front guide rails and extension connector.
Steps for attaching the rear guide rails to the table saw.
Instructions for assembling the rip fence handle and securing it.
Procedure for leveling and adjusting the front guide rail for accurate cuts.
Detailed steps for assembling and installing the blade guard and splitter.
Instructions on operating the power switch, locking mechanism, and overload reset.
Guidance on using handwheels to adjust blade height and tilt for bevel cuts.
Procedure for setting and adjusting the positive stops for 90 and 45 degree blade tilts.
Steps for mounting the rip fence onto the guide rails for operation.
Instructions on how to move, align, and adjust the rip fence for parallel cuts.
Details on using the miter gage and adjusting its index stops.
Procedure for adjusting the table insert to be flush with the saw table surface.
Step-by-step guide for safely removing and installing saw blades.
Instructions on checking and replacing motor brushes for continued operation.
Explains the proper method for performing cross-cutting operations using the miter gage.
Details on performing ripping operations using the rip fence and safety guards.
Guide to using the accessory moulding cutterhead for shaping workpieces.
Covers essential safety warnings and operational details for the moulding cutterhead.
Instructions for using the dado head, including safety precautions and installation.
Guidance on adding wood facing to the rip fence for specific operations.
Instructions and dimensions for building a featherboard for improved workpiece control.
Provides a pattern and instructions for making a push stick for safe ripping.
Information on available accessories and a warning about using non-Delta accessories.
Details on obtaining parts, service, and warranty information.
A dedicated page for user notes and observations.
Directory of Porter-Cable and Delta authorized service centers in the US and Canada.
Lists registered trademarks associated with Delta and Porter-Cable products.
