Delta ShopMaster TS300 - STAND PARTS IDENTIFICATION; Stand Component List

8
STAND PARTS
Fig. 3
1
2
3
4
5
6
7
8
9
For Saw Stand
1. - Top Front and Rear Braces - 19" in length (2)
2. - Bottom Front and Rear Braces - 22-1/2" in length (2)
3. - Stand Legs (4)
4. - Feet (4)
5. - 3/8" Flat Washer (32)
6. - M8x1.25x16mm Carriage Head Screw (32)
7. - M8x1.25 Hex Nut (32)
8. - Bottom Side Braces - 20" in length (2)
9. - Top Side Braces - 16-1/2" in length (2)