7
HARDWARE
Fig. 2
For Blade Guard and Splitter Assembly
1. - Splitter Bracket
2. - 5/8" Flat Washer (2)
3. - M12x1.75 Hex Nut (2)
4. - M6x1x20mm Hex Head Screw
5. - 1/4" External. Tooth Lockwasher (2)
6. - 5/16" Flat Washer (2)
7. - M6x1 Wing Nut
8. - 7/8" Open End Wrench
9. - 15/16" Hex Arbor Wrench
For Front Guide Rail
10.- M6x1x20mm Carriage Head Screw (5)
11.- M6.4 Flat Washer (5)
12.- M6.1 Lockwasher (5)
13.- M6x1 Hex Nut (5)
For Fastening Saw to Stand
14.- M8x1.25x16mm Hex Head Screws (4)
15.- 3/8" Flat Washer (8)
16.- M8x1.25 Hex Nut (4)
For Rear Guide Rail
17.- M8x1.25x16mm Hex Head Screw (5)
18.- M8.4 Flat Washer (7)
19.- M8.1 Lockwasher (7)
20.- M8x1.25 Hex Nut (2)
For Extension Wings
21.- M8x1.25x16mm Hex Head Screw (6)
22.- 5/16" Lockwasher (6)
23.- 3/8" Flat Washer (6)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
3
2
5
6
To Next Page
Loading...
