Chapter 7 Optional AccessoriesC2000 Plus
7-138
“MKC-BFM” Installation
1. Install accessory 1& 2 by tightening 4 of the screw 1 (M8). Screw torque: 40–45 kg-cm / (34.7–39.0 Ib-in.) /
(3.9–4.4 Nm) (as shown in the figure below)
Figure 7-206
2. Plate installation, place 6 of the screw 2 (M6) through accessory 1 & 2 and the plate then tighten the screws.
Screw torque: 25–30 kg-cm / (21.7–26 Ib-in.) / (2.5–2.9 Nm) (as shown in the figure below)
Figure 7-207
To Next Page
Loading...
Need help?
General