Chapter 9 Specification C2000 Plus
Item Specifications
Product Compliance*
10
CE
Low Voltage Directive(LVD) 2014/35/EU, EN61800-5-1
EMC Directive 2014/35/EU, EN61800-3
UL508C, cUL CAN/CSA C22.2 No.14-13, No.274*
6
, Plenum rated
RCM, KC*
7
, EAC*
7
, (Cم mark)*
8
, SEMI F47-0706, GB12668.3
WEEE 2012/19/EU, RoHS 2011/95/EU*
9
Quality assurance system ISO 9001 and Environmental system ISO 14001
Safety Standard*
10
Safe Torque Off（EN / IEC61800-5-2）TUV Rheinland Certified
IEC62061/IEC61508, SIL CL2
EN ISO13849-1, Cat.3/PL d
Table 9-8
NOTE:
*1: 230V
AC
／460V
AC
models: support synchronous reluctance control mode after the firmware V3.06;
575V
AC
／690V
AC
models: support field-oriented control (FOC) mode after the firmware V2.06.
*2: The setting range of the maximum output frequency varies from carrier and control modes. Refer to Pr.01-00 and
Pr.06-55 for more information.
*3: Based on heavy duty, and the speed control range varies from environment, application conditions, types of motor
and encoder.
*4: Defined under torque control (TQC) mode.
*5: The protection level can adjust via parameters.
*6: VFD4500C43x-xx, VFD5000C43x-xx, VFD5600C43x-xx do not have UL certification.
*7: Only for 230V
AC
/ 460V
AC
models.
*8: Mandatory conformity mark in Morocco.
*9: In the process of applying for RoHS 2015/863/EU.
*10: For information on Certifications and Declaration of Conformity (DoC), visit
Delta | Download Center (deltaww.com)
To Next Page
Loading...
Need help?
General