Chapter 10 Digital KeypadC2000 Plus
10-18
When the setting value is 0 Min, the backlight
remains on.
When the setting value is 10 Min, the backlight
turns off in 10 minutes.
3. Text Color
Press ENTER go to the Text Color Setting
screen.
The default value is White Text.
Press the UP / DOWN keys to adjust the
setting value, and then press ENTER.
1:
2:
3:
The setting value changes to Blue Text.
13. Start-up
1. Default 1 DELTA LOGO
Industrial Automation
2. Default 2 DELTA Text
Industrial Automation
CSeries
3. User Defined: an optional accessory is required (TPEditor & USB / RS-485
Communication Interface-IFD6530) to design your own start-up screen.
If the editor accessory is not installed, the User Define option displays a
blank screen.
USB/RS-485 Communication Interface-IFD6530
Refer to Chapter 07 Optional Accessories for more details.
TPEditor
Download TPEditor software at Delta website. Select TPEditor version 1.60
or later. Refer to the installation instruction for TPEditor in Section 10-3.
To Next Page
Loading...
Need help?
General