Delta VFD055C43A User Manual

Chapter 1 IntroductionC2000 Series
1-1
Chapter 1 Introduction
1-1 Receiving and Inspection
After receiving the AC motor drive, please check for the following:
1. Please inspect the unit after unpacking to assure it was not damaged during shipment. Make sure that
the part number printed on the package corresponds with the part number indicated on the
nameplate.
2. Make sure that the voltage for the wiring lie within the range as indicated on the nameplate. Please
install the AC motor drive according to this manual.
3. Before applying the power, please make sure that all the devices, including power, motor, control
board and digital keypad, are connected correctly.
4. When wiring the AC motor drive, please make sure that the wiring of input terminals “R/L1, S/L2, T/L3”
and output terminals”U/T1, V/T2, W/T3” are correct to prevent drive damage.
5. When power is applied, select the language and set parameter groups via the digital keypad
(KPC-CC01). When executes trial run, please begin with a low speed and then gradually increases
the speed untill the desired speed is reached.
1-2 Nameplate Information
MODEL:VFD007C43A
INPUT:
Normal Duty: 3PH 380-480V 50/60Hz 4.3A
Heavy Duty: 3PH 380-480V 50/60Hz 4.1A
OUTPUT:
Ver si on :
FREQU ENCY RA NGE:
Normal Duty: 3PH 0-480V 3A 2.4KVA 1HP
Heavy Duty: 3PH 0-480V 2.9A 2.3KVA 1HP
Normal Duty: 0 -59 9Hz
Heavy Duty: 0-300Hz
VX.XX
007C43A7T14300002
DE LTA EL ECTRONICS. INC .
MA DE IN XXXXXX X
AC Drive Model
Input Voltage/Current
Output Voltage/Current
Frequency Range
Firmware Version
Certif cations
Serial Number
Enclosure type (IPXX)
i

Delta VFD055C43A Specifications

General

Brand	Delta
Model	VFD055C43A
Category	Media Converter
Language	English

Summary

Chapter 1 Introduction

1-1 Receiving and Inspection

Inspect unit for damage, verify part number, voltage, connections, and wiring before applying power.

1-2 Nameplate Information

Details AC Drive Model, Input/Output Voltage/Current, Frequency Range, Firmware Version, Certifications, Enclosure type, and Serial Number.

1-3 Model Name

Explains the components and meaning of the AC Drive Model name (VFD007C43A).

1-4 Serial Number

Details the components of the Serial Number (Production number, week, year, factory, model).

1-5 RFI Jumper

Describes the RFI jumper's function for suppressing electrical noise and its installation for Frames A-C.

1-6 Dimensions: Frame A

Provides physical dimensions (W, H, D, etc.) for Frame A AC drives.

1-6 Dimensions: Frame B

Provides physical dimensions (W, H, D, etc.) for Frame B AC drives.

1-6 Dimensions: Frame C

Provides physical dimensions (W, H, D, etc.) for Frame C AC drives.

1-6 Dimensions: Frame D0-1

Provides physical dimensions (W, H, D, etc.) for Frame D0-1 AC drives.

1-6 Dimensions: Frame D0-2

Provides physical dimensions (W, H, D, etc.) for Frame D0-2 AC drives.

1-6 Dimensions: Frame D1

Provides physical dimensions (W, H, D, etc.) for Frame D1 AC drives.

1-6 Dimensions: Frame D2

Provides physical dimensions (W, H, D, etc.) for Frame D2 AC drives.

1-6 Dimensions: Frame E1

Provides physical dimensions (W, H, D, etc.) for Frame E1 AC drives.

1-6 Dimensions: Frame E2

Provides physical dimensions (W, H, D, etc.) for Frame E2 AC drives.

1-6 Dimensions: Frame F1

Provides physical dimensions (W, H, D, etc.) for Frame F1 AC drives.

1-6 Dimensions: Frame F2

Provides physical dimensions (W, H, D, etc.) for Frame F2 AC drives.

1-6 Dimensions: Frame G1

Provides physical dimensions (W, H, D, etc.) for Frame G1 AC drives.

1-6 Dimensions: Frame G2

Provides physical dimensions (W, H, D, etc.) for Frame G2 AC drives.

1-6 Dimensions: Frame H1

Provides physical dimensions (W, H, D, etc.) for Frame H1 AC drives.

1-6 Dimensions: Frame H2

Provides physical dimensions (W, H, D, etc.) for Frame H2 AC drives.

1-6 Dimensions: Frame H3

Provides physical dimensions (W, H, D, etc.) for Frame H3 AC drives.