Need help?Do you have a question about the Delta VFD075CB43A-20 and is the answer not in the manual?
General| Model | VFD075CB43A-20 |
|---|---|
| Power Rating | 7.5 kW |
| Horsepower | 10 HP |
| Input Phase | 3-Phase |
| Output Phase | 3-Phase |
| Enclosure | IP20 |
| Input Voltage | 380-480V AC |
| Control Mode | V/f control, Sensorless Vector Control |
| Protection Features | Overvoltage, Overcurrent, Overload, Overtemperature, Short Circuit, Phase Loss |
| Cooling Method | Fan Cooling |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Altitude | Up to 1000 m |
Critical safety guidelines for installing the AC motor drive before connecting power.
Steps to check the AC motor drive unit after unpacking to ensure it was not damaged during shipment.
Guidelines for minimum mounting clearances and installation to ensure proper operation and heat dissipation.
Formulas for calculating required capacity for single and multiple motor applications.
Important precautions to consider before selecting an AC motor drive for various applications.
Essential precautions to follow before starting any wiring installation for the AC motor drive.
Detailed wiring diagram illustrating power and control terminal connections.
Diagrams showing main circuit connections for Frame A0 and Frame A.
Catalog of brake resistors and units compatible with AC motor drives.
Detailed specifications for 230V single-phase AC motor drives.
Detailed specifications for 230V three-phase AC motor drives.
Detailed description of drive parameters, including identity code, rated current, and parameter reset.
Description of parameters for configuring motor characteristics and auto-tuning procedures.
Description of parameters for various protection functions like over-current, over-voltage, and stall prevention.
Fault code 'ocA' for over-current during acceleration and corrective actions.
Fault code 'oL' indicating overload with corrective actions.
Steps and modes for controlling AC motor drives via CANopen.
List of CANopen fault codes, descriptions, CANopen fault codes, and fault registers.
Important precautions to follow when using PLC functions for parameter programming and operation.
List of PLC error codes and their corresponding corrective actions.
Guidelines for routine maintenance and inspections of AC motor drives.
To Next Page
