Need help?Do you have a question about the Delta VFD015CB43A-20 and is the answer not in the manual?
Specifies the required clearances around the AC motor drive for proper ventilation and safe installation.
Provides formulas and calculations needed to determine the correct AC motor drive capacity based on motor and application requirements.
Critical safety guidelines and precautions that must be followed before performing any wiring installation on the AC motor drive.
Schematic diagrams showing the power and control terminal connections for the AC motor drive, aiding in correct wiring.
Schematic diagrams showing the main power circuit connections for Frame A0 and Frame A AC motor drives.
Details on the main power terminals, including input power requirements and connection precautions to prevent damage.
Detailed electrical and operational specifications for 230V single-phase AC motor drives.
Detailed electrical and operational specifications for 230V three-phase AC motor drives.
Detailed electrical and operational specifications for 460V AC motor drives.
Lists fundamental drive parameters, their explanations, settings, and factory defaults for basic configuration.
Lists fundamental drive parameters, their explanations, settings, and factory defaults for basic configuration.
Covers parameters essential for motor configuration, including auto-tuning, full-load current, rated power, speed, and pole number.
Lists various protection parameters like over-voltage, over-current, stall prevention, and fault records for safe operation.
Details the fault code, description, and corrective actions for over-current conditions during acceleration.
Details the fault code, description, and corrective actions for over-current conditions during deceleration.
Details the fault code, description, and corrective actions for over-current conditions during steady-state operation.
Details the fault code, description, and corrective actions for DC bus over-voltage during acceleration.
Details the fault code, description, and corrective actions for DC bus over-voltage during deceleration.
Details the fault code for overload conditions and corrective actions, including checking motor load and drive capacity.
Provides a list of common PLC error codes and their corresponding corrective actions for troubleshooting.
Outlines a comprehensive maintenance schedule and inspection procedures for ensuring the AC motor drive's optimal performance and longevity.
Highlights common issues with wrong wire installation or poor wiring, and provides solutions and safety precautions.
To Next Page
General
