Need help?Do you have a question about the Delta C200 Series and is the answer not in the manual?
General| Graphics | Integrated Intel UHD Graphics |
|---|---|
| Operating System | Windows 10 |
| Ports | HDMI, DisplayPort, Ethernet, audio jack |
| Processor | Intel Core i5 or i7 |
| Dimensions | Varies depending on the specific model (Small Form Factor, Tower) |
| Weight | Varies depending on the specific model |
Crucial safety instructions to follow before installing the AC motor drive to ensure safe operation and prevent damage.
Guidance on how to inspect the AC motor drive upon receiving it to ensure it's undamaged and correctly specified.
Details on interpreting the information provided on the AC motor drive's nameplate for correct installation and usage.
Explanation of the RFI jumper's function in suppressing electrical noise and interference on the power line.
Instructions on handling the RFI jumper when the main power is isolated from earth to prevent circuit damage.
Provides detailed dimensions for Frame A0 models, including width, height, depth, and mounting hole specifications.
Details about the digital keypad (KPE-LE02), including its dimensions and connection interface.
Specifies minimum clearances required for mounting the AC motor drive for proper ventilation and operation.
Guidance on installing multiple drives side-by-side or in rows, including necessary clearances and considerations for mutual heating.
Important notes regarding mounting clearances in confined spaces, ventilation, and parameter settings for heat dissipation.
Illustrates derating curves for normal duty applications based on operating temperature and enclosure type.
Shows derating curves for heavy duty applications, considering operating temperature and enclosure type.
Table detailing factors to consider when selecting an AC motor drive, including load type, speed, characteristics, and ratings.
Provides formulas for calculating the required capacity of AC motor drives for single and multiple motor applications.
General precautions for selecting AC motor drives, including considerations for power transformers and motor characteristics.
Guidance on selecting appropriate motors, including precautions for standard motors and considerations for special motors.
Essential safety precautions and checks to perform before wiring the AC motor drive to prevent damage and ensure safety.
Detailed wiring diagram illustrating power and control connections for the AC motor drive.
Diagrams showing the main circuit connections for Frame A0 and Frame A models.
Precautions and guidelines for connecting main power to the AC motor drive terminals.
Instructions on how to safely remove the cover to access the control terminals for wiring.
Diagrams illustrating the control terminal layout for Frame A0 and Frame A.
Details on wire gauge and torque specifications for control terminal connections.
Information on selecting and using brake resistors and units with AC motor drives, including specifications and ED% definitions.
Recommendations for non-fuse circuit breakers based on model and phase, adhering to UL standards.
A chart listing recommended fuses for various AC motor drive models, including class, catalog number, and rating.
Details on AC reactors, including specifications and applications for input circuit connection to manage peak currents.
Information on EMI filters, including applicable models, reference websites, installation guidelines, and motor cable precautions.
Overview of digital keypads (KPC-CC01, KPC-CE01), including their communication interface, installation method, and keypad functions.
Technical specifications for 230V single-phase models, covering output rating, input rating, cooling, and braking.
Technical specifications for 230V three-phase models, including output rating, input rating, cooling, and braking.
Technical specifications for 460V models, detailing output rating, input rating, cooling, and braking.
General specifications for the AC motor drive, including control method, torque, frequency, and protection characteristics.
Guidelines on environmental conditions for operation, storage, and transportation of the AC motor drive.
Detailed description of the KPE-LE02 digital keypad, its keys, and display messages.
Step-by-step guide on operating the digital keypad, including setting modes and parameters.
Summary of drive parameters, including identity code, rated current, and parameter reset.
Overview of basic parameters like operation frequency, voltage, and acceleration/deceleration times.
Details on digital input/output parameters, including operation control and multi-function input/output assignments.
Summary of analog input/output parameters, covering selection, bias, gain, filter time, and output settings.
Parameters for setting multiple speed steps, including frequency and timing for each step.
Parameters related to motor characteristics, including auto-tuning, full-load current, rated power, speed, and pole numbers.
Summary of protection parameters such as low/over-voltage, over-current, and stall prevention.
Overview of special parameters, including software brake, DC brake, fan cooling, and emergency stop functions.
Parameters for advanced PID control, including input terminals, gains, limits, and mode selection.
Parameters for communication settings, including address, transmission speed, fault treatment, and protocol selection.
Parameters related to speed feedback control, including encoder settings, stall, slip, and FOC/TQC functions.
Parameters for advanced control features like system control, ASR, torque limits, and flux weakening.
Detailed description of drive parameters, including identity code, rated current, parameter reset, and display selections.
Comprehensive details on basic parameters like operation frequency, voltage, mid-point settings, and acceleration/deceleration.
Description of digital input/output parameters, including operation control, multi-function inputs, and output terminal settings.
Details on analog input/output parameters, covering selection, bias, gain, filter time, and output settings.
Parameters for setting multi-step speeds, including frequency, timing, and external terminal control.
Parameters related to motor characteristics, including auto-tuning, current, power, speed, pole numbers, and resistance.
Summary of protection parameters such as low/over-voltage, over-current, stall prevention, and fault records.
Overview of special parameters including software brake, DC brake, fan cooling control, and emergency stop functions.
Detailed parameters for advanced PID control, covering input terminals, gains, limits, and mode selection.
Parameters for communication settings, including address, transmission speed, fault treatment, protocol, and decoding methods.
Explains the display of error signals on the keypad and the corresponding meanings of error codes.
Provides a list of abbreviated error codes displayed on the keypad for quick identification of issues.
Illustrates how error codes are displayed on the KPC-CE01 keypad for reference.
Detailed descriptions of warning codes and their corresponding corrective actions.
Introduction to CANopen protocol, its specifications, and services.
Guidelines for wiring the CANopen interface, including adapter cards, cables, and terminating resistors.
Steps and parameters required to control the AC motor drive using CANopen.
Index of supported CANopen parameters, including device type, error register, COB-ID, and PDO mapping.
A comprehensive list of CANopen fault codes, their descriptions, and corresponding CANopen fault register bits.
Explanation of the RUN and ERR LED indicators for CANopen communication status.
Introduction to the PLC function, including commands, operation methods, and software requirements.
Essential precautions for using PLC functions, covering communication protocols, parameter settings, and program execution.
Step-by-step guide for PLC execution, including program download, connection, and mode selection.
Explanation of PLC ladder diagram structure, symbols, and operation, including scan charts and basic circuit examples.
Details on PLC devices such as input/output contacts, timers, counters, data registers, and communication ports.
Description of basic PLC commands, including load, output, timer, counter, and main control commands.
List of common PLC errors and their corresponding corrective actions for troubleshooting.
Guidelines for routine maintenance and inspections of the AC motor drive, covering environmental, voltage, keypad, and mechanical checks.
Describes the issue of greasy dirt problems in industrial environments and provides solutions to prevent drive damage.
Highlights fiber dust issues common in textile industries, their potential damages, and recommended solutions.
Explains erosion problems caused by fluid ingress into drives and suggests solutions for prevention.
Addresses problems caused by industrial dust, its impact on drive components, and recommended solutions for ventilation.
Common wiring and installation issues, such as loose screws and improper connections, and their potential damages.
Discusses errors related to multi-function terminals caused by exceeding usage limits and provides solutions.
To Next Page
