Delta VFD150VL43C-J

Appendix C: MSJ 220V & 380V Hybrid Servo Motor | VFD-VJ
Apx C-5

*2: Set up PTC type Pr02-11 =2 to use PTC130 as temperature protection.
*3: Users are required to set up the parameter Pr02-09 PTC Level (factory setting: 130 ºC)
when using the KTY84-130
temperature sensor (PTC type Pr02-11 =1) for motor overheating protection.
*4: Delta reserves the right to revise specifications without prior notice.