Chapter 10 Digital KeypadC2000-HS
10-9
4. After pressing ENTER to delete <01
Control Mode>, the <02 Maximum
Operating Frequency > automatically
replaces <01 Control Mode>.
3. Application Selection List
This function allows user to select application and its parameters sets.
Example:
Select 3: Application Selection List
Press ENTER to go into the Application Selection List
Select Application
Press ENTER to enter the application selection screen, the selected
application set will be “Fan”.
Press ENTER to enter the Fan application set screen.
Press Up/ Down key to select the parameter.
Choose 0: Normal load on the needs, then press ENTER.
To Next Page
Loading...
Need help?
General