Delta VFD300C43S-HS User Manual

Chapter 10 Digital KeypadC2000-HS
10-8
27. Derating protection (Pr.06-55)
28. Emergency stop (EF) & Force to stop
selection (Pr.07-20)
29. Torque command filter time
(Pr.07-24)
30. Slip compensation filter time
(Pr.07-25)
31. Slip compensation gain (Pr.07-27)
3. My Mode
Click F4 in parameter
setting page, the
parameter is saved to
My Mode. To delete or
correct the parameter,
enter this parameter and
click the “DEL” on the
bottom right corner.
Items
It saves 01–32 sets of parameters (Pr).
Setup process
1. Go to “Parameter Setup” function.
Press ENTER to go to the parameter
which you need to use. There is an ADD
on the bottom right-hand corner of the
screen. Press F4 on the keypad to add
this parameter to My Mode.
00-10
0
Speed M ode
0~3 ADD
2. The parameter (Pr) will be displayed in
My mode if it is properly saved.
To correct or to delete this Pr., click
DEL.
3. To delete a parameter, go to “My Mode”
and select a parameter which you need
to delete.
Press ENTER to enter the parameter
setting screen. There is a DEL on the
bottom left-hand corner of the screen.
Press F4 on the keypad to delete this
parameter from My Mode.
00-10
0
Speed Mode
0~3 DEL

Delta VFD300C43S-HS Specifications

General

Brand	Delta
Model	VFD300C43S-HS
Category	DC Drives
Language	English