Chapter 12 Description of Parameter SettingsC2000-HS
12.1-06-25
When the KTY is not connected, or the KTY is burned, the calculated temperature is beyond
-40–150ºC, the temperature is displayed as its lower limit (-40ºC) or upper limit (150ºC) without
additional error information. At this time, the drive still trips up the oH3 error, check if the
installation is correct.
When the temperature detection warning occurs to the KTY-84, select the action according to Pr.
06-29.
To Next Page
Loading...
Need help?
General