11
It operates by pressing for 0.5 second and then do it
again within 3 seconds to open sunroof etc. To close, please
do the same process once again.
3. Query Function
Query function allows you to check the statues of your
vehicle including car battery voltage, car temperature and
parking timer (it indicates how many minutes and hours
have passed after the system is armed). By pressing button
IV for 0.5 second, it shows the parking timer and then either
car temperature or car battery voltage (the other one appears
as the same button job is repeated).
The icon and chirping sounds indicates the statues. If you
are within transmitting distance to receive the signal for
shock, theft and easy call function, you will receive the
response shown on the table.
Response
Status Remote
Siren from
the vehicle
Engine Running, Armed Be, bip Be×4 Chirp×3
Enging is Not Running, Armed Bip Be×4 Chirp
Enging is running, Disarmed Be, bip×2 Be×4 Chirp×4
Engine is not running, Disarmed Bip×2 Be×4 Chirp×2
4. Valet
To Next Page
Loading...
