30
/ USER'S GUIDE
① Wait, the light moves from number
1 LED during lock, unlock or valet
mode.
② Number 1 LED will be on for 2
seconds and off, number 2 led will
be on 2 seconds and off, and it will
continuously move around to 0.
③ Knock on the sensor once on your first digit of your
password, light will flash once more to confirm the
recognition.
④
Repeat the step 3 for your second, third and forth number
of your password.
⑤ After your forth password, vehicle will lock (if it was
unlocked), or unlock (if it was locked).
During Valet mode, doors can lock or unlock only.
In case that the incorrect passwords are inputted more than 5
times, Easy Door Lock will not be functional for 20 minutes.
4-4 LED Display
① During Arming: From (9) to (3), the 5 LEDs will
sequentially flash five times left to right, and right to left
(9-0-1-2-3-2-1-0-9-0). After that, LEDs will be on for 2
seconds each from number 1 to 0, and you can enter your
password, while each LED is on for 2 seconds.
②
If alarm was triggered during the arming mode, LED will
flash rapidly in sequence above after the siren duration.
③ During the siren duration, all LED will flash
simultaneously
④ During disarming: (0) Led will flash five times every 3
seconds.
⑤ During Valet mode: (0) Led flashes every 10 seconds.
To Next Page
Loading...
