13
activate, and the parking lights will flash for 90 seconds. This
function is used for warning under emergency situations,
when you feel you are in danger.
Press and hold button for 2 seconds to deactivate.
7. Remote Start
7-1
: Once
Press and hold button , for 2
seconds, the remote chirps and
the parking lights flash once
each.
If it fails, the system
automatically repeats remote
start a maximum of 3 times.
When the vehicle starts,
appears on the transmitter and
the remaining engine running
time is displayed on the remote.
The default setting of the engine running time is 15
minutes. You can change it to 25 minutes by using optional
settings.
7- 2
Open the door, insert the key, and turn it to ON position
after remote start, If you want to stop the auto starting,
press the foot brake.
7-3 Emergency Brake(Option setting)
To Next Page
Loading...
