21
6-1
Press ( + ) for 2 seconds
and release, the press the button
for 0.5 second and release.
In this mode, engine continues
to run for a selected time of 30
seconds or 2 minutes (you can
change the setting in option
menu).
This is very useful for turbo charged vehicles to cool down
the mechanical components after driving.
To exit, follow the same procedure above again.
6-2 Start button model
In the mode, engine continues to run for a selected time of
30 seconds or 2 minutes (you can change the setting in
option menu).
①
Please follow the step on the remote as above.
② While the engine is running, activate the parking brake
(auto transmission) or the emergency brake (manual
transmission)
③ While pressing the foot brake on, press start button for 1
second and then release. The remote chirps and the
parking lights flash once each(for from the key box).
④ The engine keeps running and the start button's LED
rotates diagonally.
⑤ Open the door and close
⑥ The engine additionally runs for 30 seconds (or 2
minutes, changed in option)
To Next Page
Loading...
