To Next PageTo Next PageWhy is my DEMA SQUIRT DRAIN UNIT pump overfeeding or underfeeding chemical?
The programs entered in the unit might be set incorrectly. Double-check the program settings to ensure they are accurate. A frequent error involves confusing AM and PM settings.
Why does my DEMA SQUIRT DRAIN UNIT Dispenser pump run constantly?
The Event number, Days, or AM/PM for the off time may not match. Review the programs for each program's off time and ensure the events are correctly matched.
Why is my DEMA Dispenser pump running when it is not programmed to?
This can occur if the program, date, and time are set incorrectly, or if an off time was not programmed. Verify the program, date, and time settings to ensure they are accurate. A common mistake is confusing AM and PM. Also, check the programs for an off time for each program.
What to do if DEMA SQUIRT DRAIN UNIT Dispenser pump is not priming or holding a prime?
If the pump isn't priming correctly, it could be due to several reasons: * Check the tubing from the chemical container to the pump head for leaks by feeling the tubing for chemical that has leaked out. Replace the tube if necessary. * Inspect the squeeze tube for holes or leaks and replace it if needed. * Tighten the nuts on the squeeze tube fitting.
The Squirt is a chemical dispenser with a programmable timer for dispensing chemicals into drains.
Follow electrical codes, shut off power, use certified electricians for installation.
Adhere to plumbing codes, use backflow devices, and wear protective gear.
Lists components included with the DEMA Squirt Drain Unit.
Defines main power, case material, and product weight specifications.
Lists part numbers and descriptions for unit components and replacements.
Instructions for mounting the unit and cutting tubing for chemical dispensing.
Step-by-step guide for installing the squeeze tube into the pump head.
Using the bottom clip for power cord strain relief.
Ensuring proper pump head installation using the clasp feature.
How to switch between 12-hour and 24-hour (military) display modes.
Procedure for setting the current time and day of the week on the unit.
Setting the days and times for the pump to start dispensing.
Setting the pump's run duration to control dispense volume.
Using manual mode to prime the pump and calibrate dispense volume.
Ensuring the unit is in AUTO mode for programmed operation.
Visual guide showing wire colors and connections for operation.
Information on the rechargeable battery for display and program retention.
Diagnosing issues when the pump runs unexpectedly or not at all.
Troubleshooting problems with the pump not priming or losing its prime.
Resolving issues with incorrect chemical dispense volume.
Identifying causes for the pump running continuously.
Procedure for returning merchandise for credit or repair.
Covers DEMA's one-year limited warranty against defects.
The Squirt is a chemical dispenser with a programmable timer for dispensing chemicals into drains.
Follow electrical codes, shut off power, use certified electricians for installation.
Adhere to plumbing codes, use backflow devices, and wear protective gear.
Lists components included with the DEMA Squirt Drain Unit.
Defines main power, case material, and product weight specifications.
Lists part numbers and descriptions for unit components and replacements.
Instructions for mounting the unit and cutting tubing for chemical dispensing.
Step-by-step guide for installing the squeeze tube into the pump head.
Using the bottom clip for power cord strain relief.
Ensuring proper pump head installation using the clasp feature.
How to switch between 12-hour and 24-hour (military) display modes.
Procedure for setting the current time and day of the week on the unit.
Setting the days and times for the pump to start dispensing.
Setting the pump's run duration to control dispense volume.
Using manual mode to prime the pump and calibrate dispense volume.
Ensuring the unit is in AUTO mode for programmed operation.
Visual guide showing wire colors and connections for operation.
Information on the rechargeable battery for display and program retention.
Diagnosing issues when the pump runs unexpectedly or not at all.
Troubleshooting problems with the pump not priming or losing its prime.
Resolving issues with incorrect chemical dispense volume.
Identifying causes for the pump running continuously.
Procedure for returning merchandise for credit or repair.
Covers DEMA's one-year limited warranty against defects.
General
