DEMA VPM 400 D User Manual

110
Default Screen Timeout Display
4.5.10 Main Screen Measurement
Here, the selection of the voltage or current measurements to be displayed is shown in the
field in the following screen. The main screen measurement selection is located on the device

Main Screen Measurement Display
4.6 Configuration
It is the screen where the information required for the field installation of the device is
configured. The configuration settings are listed under alt

DEMA VPM 400 D Specifications

General

Rated operational voltage	400 V AC
Rated operational current	16 A
Utilization category	AC-1
Electrical durability	100, 000 operations
Number of poles	4
Voltage	400V AC
Mechanical durability	10, 000, 000 operations
Coil voltage	24 V DC