Need help?Do you have a question about the DEMA CPM 310 G and is the answer not in the manual?
Highlights the CPM 310 G's key features, functions, and compliance with international standards.
Guides users through the relay setting procedures, including dip-switch and menu settings.
Details the steps for commissioning the CPM 310 G, including auxiliary supply and CB tests.
Covers normal operation, fault diagnosis, maintenance, and recommissioning cycles of the relay.
Details the parameters for setting the phase overcurrent 1st threshold protection function.
Explains how to configure the earth overcurrent 1st threshold protection parameters.
Details the settings for negative sequence overcurrent 1st threshold protection.
Covers the configuration of the auto-recloser function, including shots, dead times, and inhibit.
Explains the functions for monitoring circuit breaker performance like opening/closing times and spring status.
Details the electrical characteristics, input/output, relay contacts, and programmable inputs.
Lists the default parameter values for protection functions, communication, and automatic controls.
To Next Page
General
